Gas Furnace Service

Basic Clean and Tune
*Includes local trip charge to normal service area
  • Inspect / Clean Burners
  • Inspect / Clean Flame Sensor & Ignitor
  • Inspect / Clean Pilot Assembly
  • Inspect / Test Limits and Safeties
  • Visual inspection of Heat Exchanger
  • Visual inspection of fan motor
  • Visual inspection of inducer motor
  • Inspect / Clean furnace condensate
  • Visual Inspection of Secondary Heat Exchanger -- (cleaning is extra -- see option below)
  • Check Temperature rise and adjust blower as needed
  • Check thermostat (batteries extra)
  • Check filter (new filter is extra)
  • Combustion Analysis Test
  • Lubricate motors
  • Run test and check operation

Optional Enhancements of Service

Service Humidifier
Clean blower wheel
Replace condensate hoses
  • Change pad
  • Clean & Service Humidifier & Assembly
  • Run Test & check operation
  • Remove blower assembly
  • Clean blower wheel
  • Run Test & check operation
  • Remove condensate hoses and upgrade to 3/4" vinyl hoses
  • Allows for visual inspection of condensate flow and the 3/4" gives optimum water flow
Service Air Exchanger
Install ClenAir Odor Neutralizing Gel Tub
  • Clean / Inspect Energy Core
  • Clean / Inspect Blower Wheel
  • Replace filter & Check operation
  • Eliminates odors from pets, smoke, oil and more
  • Non-toxic 1/2 lb. tub
  • Install in furnace blower compartment
Clean Secondary Heat Exchanger
Clean / Inspect UV light / purifier
  • Use Triple D Non-toxic biodegradable coil cleaner on HE
  • Clean HE thoroughly with brush and check airflow
  • Clean bulb & assembly (verify bulb life & consult accordingly)
  • Run test and check operation